LED Controller USB Cable for DIY RGB Lights LED Strip LC04

The RGB LED strip LED controller USB cable is 1.5m long with a male USB 2.0 port. It is designed to use with an RGB+ DC 5V LED strip. There are three control buttons to turn on/off and set light color, brightness, and light modes.

The USB cable color can be black and white. With optional RF remote control, you can turn it on/off, set light color, light mode, set timer, flashing speed, etc.

HOW TO USE IT?

1. Prepare DC 5V RGB+ LED strip with 4 solder points: R, G, B, +. Solder the 4 wires to 4 solder points as above photo. (red line to R, black line to +, green line to R, blue line to B).
2. Add a shrink tube to the soldering part and blow with a heat gun.

FAQ:

1. Do you have a DC 12V 1A version USB Cable LED controller?
   

   – Yes, we have. Please contact our sales team for the details.

2.  What kind of LED strip is suitable for this USB cable with a built-in LED controller?
   

   – It needs a DC 5V RGB+ LED strip with 4 solder points. 

3. What’s the power source?
   

   – It is DC 5V USB powered. You can connect it to a USB cable and USB adapter, laptop, or mobile power bank.

4.  Will the RF remote control other LED strips within the remote range?
   

   – Yes, RF remote will control all the led strips within the remote range.

5.  Do you also supply the 5V RGB+ led strip part separately?
   

   – Yes, please contact our sales team for the details (length of led strip, etc). MOQ is 1 meter.

6.  Is it ok to add a memory function for the USB cable with led controller LC04?
   

   – LC04 5V LED controller USB cable does not have a memory function. It is ok to add this function, but the unit price is 0.08 USD higher and MOQ is 1,000 pieces.

CUSTOM-MADE LED STRIP KIT:

Custom-length LED strip
Custom LED strip type (light color, voltage: 5V or 12V, LED strip width: 3mm/4mm/5mm/6mm/8mm/10mm)
Optional 5V / 12V power adapter